AVAILABLE OPTIONS

A1 Water Cooled Condenser

COLORS

Custom colors available for OEM customers

CONTROLS

E1     Control Package E1 includes Touch Screen Control

        - Level Low

        - Low Flow

            - Temperature alarm

        - Cooling On LED

        - Relay contacts open on fault, (NC dry), via DB9-F, pins 1 & 9

        - Remote start/stop on DB9-F, pins 3 & 7

E2     RS – 232 Interface with temp controller & PC based software

E3     RS – 485 Interface with temp controller & PC based software

E4     Analog remote control 1-5, 0-5 or 0-10VDC of temp controller

E6     E1 with an additional input, i.e. pressure switch, etc.

EM     Energy meter

RV     Return temperature display option, not available for all units

HM     Hour meter

POWER

C1     100-120VAC 50/60Hz

C2     200-230VAC 50/60Hz, Single phase

C3     200V-240V/50 Hz, Single phase

C5     200V-240V 50/60 Hz, Three phase

C6     440-480VAC, three phase

FLUID MAINTENANCE

G1     DI (1 – 3 Meg ohm) resistivity status LED, filter & plumbing

            Includes replaceable DI Cartridge

G2     Resistivity meter (0-20 meg ohm) an add-on w/ G1 option

G3     80C DI (1 – 3 Meg ohm) resistivity status LED, filter & plumbing

          Includes replaceable DI Cartridge

G4     G1 + G2 + solenoid control of resistivity level

F1     Stainless steel/plastic plumbing (1/2") (up to 10 GPM)

H1     Particle Filter (5 microns) ½" NPT

H2     Particle Filter (30 microns) ½" NPT

H4     Particle Filter (30 microns) ¾" NPT

H5     Particle filter SS housing (30 microns) ¾" port

H6     Particle Filter (5 microns) 80C compatible, ½" NPT

H7     Particle Filter (30 microns) 80C compatible, ½" NPT

H8     Particle Filter (30 microns) 20 GPM compatible, 3/4" NPT

FLUID MEASUREMENT & CONTROL

B1/2     2nd supply & return loop with flow switch, ½" NPT

B3/4     2nd supply & return loop with flow switch, ¾" NPT

FB1/2     Anti flood back kit ½", consult our engineers on usage

FB3/4     Anti flood back kit ¾", consult our engineers on usage

FB1/2SS     SS Anti flood back kit ½", consult our engineers on usage

FB3/4SS     SS Anti flood back kit ¾", consult our engineers on usage

FBS     Solenoid controlled anti-flood back system

J1     Flow Meter with flow control, (2GPM) ½" NPT

J2     Flow Meter with flow control, (8GPM) ½" NPT

J3     Flow Meter with flow control, (20 GPM) 1" NPT

J4     Flow Meter with flow control, (40 GPM), 1" or 2" NPT

J5     Flow Meter with flow control, (100 GPM), 1.5" or 2" NPT

J6     0-5 GPM digital flow display with flow control adjustment

J7     0-10 GPM digital flow display with flow control adjustment

K5     Heater 500 watts Stainless sheath type in reservoir

K10     Heater 1000 watts Stainless sheath type in reservoir

K20     Heater 2000 watts Stainless sheath type

K50     Heater 5000 watts Stainless sheath type

KS     Custom heater

KC     Heater with separate control

L1     Auto fill with redundant safety ¼" ports for supply & return

PD     Pulsation dampener on supply line Brass

PUMPS

PS     Special or custom pump

P2     Positive displacement pump-Brass 4.2 GPM

P3     Positive displacement pump-SS-2.2GPM

P4     Positive displacement pump SS-4.2 GPM

P5     Turbine type pump BRASS 5 GPM @ 60PSI

P6     Turbine type pump BRASS 10 GPM @ 60PSI

P7     Turbine type pump BRASS 15 GPM @ 60PSI

P8     Turbine type pump SS 15 GPM @ 60PSI

P9     Turbine type pump BRASS 20 GPM @ 60PSI

P10     Turbine type pump SS 20 GPM @ 60PSI

P11     Centrifugal type pump SS 10 GPM @ 40PSI

P12     Centrifugal type pump SS 15 GPM @ 40PSI

P13     Centrifugal type pump SS 20 GPM @ 40PSI

P14     Magnetically coupled SS pump 2 GPM @ 80PSI

P15     Magnetically coupled SS pump 4 GPM @ 80PSI

P16     Centrifugal type pump SS 30 GPM @ 40PSI

HOSE KITS

HK1     ½" id opaque hose push-lok type 10’, 25’ or 50’

HK2     ¾" id opaque hose push-lok type 10’, 25’ or 50’

HK3     ½" id opaque hose push-lok type 10’, 25’ or 50’

            with 3/8" wall thermal insulation

HK4     ¾" id opaque hose push-lok type 10’, 25’ or 50’

            with 3/8" wall thermal insulation

HK5     ½" id opaque hose push-lok type 10’, 25’ or 50’

            with 3/4" wall thermal insulation

HK6     ¾" id opaque hose push-lok type 10’, 25’ or 50’

            with 3/4" wall thermal insulation

Order hose as follows, HK1-25, would call out 25’ length, all hoses come with swivel fittings

FLUIDS

EG              ETHYLENE GLYCOL INDUSTRIAL GRADE 1 GAL.

EG50/50     ETHYLENE GLYCOL/WATER 50% MIXTURE INDUSTRIAL GRADE 1 GAL.

EG60/40     ETHYLENE GLYCOL/WATER 60/40% MIXTURE INDUSTRIAL GRADE 1 GAL.

HT110        GALDEN FLUORINATED FLUID FOR UP TO 110C

HT135        GALDEN FLUORINATED FLUID FOR UP TO 135C

HT200        GALDEN FLUORINATED FLUID FOR UP TO 200C

HT270        GALDEN FLUORINATED FLUID FOR UP TO 270C

REMOTE

RC 25’        NULL MODEM DB9 M TO F CABLE

USB1         USB TO SERIAL, (RS-232) CONVERTER

CNVRT      RS232 TO RS485 PORT POWERED CONVERTER

OTHER

OD            NEMA 4X Electrical enclosure & weather proofing measures

-2              Dual channel system

-3              Three channel system

-4              Four channel system

-5              Five channel system

-6              Six channel system

19R          Rack mount frame sliding mount rails

SR           Seismic restraints with adjustable height for easy installation

 If you don't see what you are looking for, please ask the sales representative you are working with.

There are many other available features and pump options.

 Not all options are available for all models, please consult BV Thermal Systems engineering or sales department for applicability.